Top Secure Remote Access Tunnels - ZyXEL Communications Vantage Report User Manual

Chapter 6 Secure Remote Access
Each field is described in the following table.
Table 80 Report > Secure Remote Access > Site-to-Site (IPSec) > Top Sites > Drill-
Down
LABEL
graph
Host
Color
Sessions
% of Sessions
MBytes
Transferred
% of MBytes
Transferred
View Logs
Total
Back

6.1.7 Top Secure Remote Access Tunnels

Use this report to look at the Secure Remote Access tunnels with the most Secure
Remote Access traffic.
196
DESCRIPTION
The graph displays the information in the table visually.
• Click the Pie View or the Bar View icon. You can specify the
Default Chart Type in System > General Configuration.
• Move your mouse over a slice in the pie chart or a bar in the bar
chart to display its identification.
• Click on a slice in the pie chart to move it away from the pie chart
a little.
This field displays the top sources of Secure Remote Access traffic to
the selected peer IPSec router, sorted by the amount of traffic
attributed to each one.
Each source is identified by its IP address. If Hostname Reverse is
enabled in System > General Configuration, the table displays the
host name, if identifiable, with the IP address.
This field displays what color represents each source in the graph.
This field displays the number of traffic events from each source to
the selected destination.
This field displays what percentage each source's number of traffic
events makes out of the total number of traffic events for the selected
destination.
This field displays how much traffic (in megabytes) was generated
from each source to the selected destination.
This field displays what percentage of the selected destination's
Secure Remote Access traffic was generated from each source.
Click this icon to see the logs that go with the record.
This entry displays the totals for the sources above. If the number of
sources of traffic to the selected destination is greater than the
maximum number of records displayed in this table, this total might
be a little lower than the total in the main report.
Click this to return to the main report.
Vantage Report User's Guide