Adding A Configuration Bb; Figure 93 Building Block > Configuration Bb > Add; Table 82 Building Block > Configuration Bb > Add - ZyXEL Communications VANTAGE CNM User Manual

Table 81 Building Block > Configuration (continued)
TYPE
Add
Delete

16.4.1 Adding a Configuration BB

Click Add from
Configuration BB. When you add a new Configuration BB, you must choose what device
type and BB configuration type you wish to add, from the Device and Type list boxes
respectively.
Figure 93 Building Block > Configuration BB > Add
The following table describes the fields in this screen
Table 82 Building Block > Configuration BB > Add
TYPE
Name
Device
Type
Note
Next
Cancel
After you click Next in
Device and Type fields you selected in
Figure 94 on page 207
the BB as shown in the screen. Refer to the corresponding Configuration chapter for details
on fields in the screen. Click Apply to save BB changes (you may click Reset to begin
configuring the screen afresh) and then click Finish to complete the BB.
Chapter 16 Building Blocks (BBs)
DESCRIPTION
Click to proceed to the next screen.
Click to delete a selected device BB.
Figure 92 on page 205. Type a Name to identify your existing or new
DESCRIPTION
Type a unique name for the building block.
Select the device type. The configuration BB's available differ for each device.
Select the configuration. Choices available depend on the device selected.
Type some extra description of the BB
Click Next to continue to the configuration BB details for the device type selected.
Click Cancel to return to the Building Block > Configuration BB summary screen.
Figure 93 on page
show the General configuration BB for a ZyWALL 10 device. Create
206, the next screen that appears depends on the
Figure 93 on page 206.
Vantage CNM User's Guide
Figure 93 on page 206 and
206