Nas-Ip (Radius Scheme View) - 3Com S7906E Command Reference Manual

Default Level
2: System level
Parameters
accounting: Sets the shared key for RADIUS accounting packets.
authentication: Sets the shared key for RADIUS authentication/authorization packets.
string: Shared key, a case-sensitive string of 1 to 64 characters.
Description
Use the key command to set the shared key for RADIUS authentication/authorization or accounting
packets.
Use the undo key command to restore the default.
By default, no shared key is configured.
Note that:
You must ensure that the same shared key is set on the device and the RADIUS server.
If authentication/authorization and accounting are performed on two servers with different shared
keys, you must set separate shared key for each on the device.
Related commands: display radius scheme.
Examples
# Set the shared key for authentication/authorization packets to hello for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key authentication hello
# Set the shared key for accounting packets to ok for RADIUS scheme radius1.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] key accounting ok

nas-ip (RADIUS scheme view)

Syntax
nas-ip ip-address
undo nas-ip
View
RADIUS scheme view
Default Level
2: System level
Parameters
ip-address: IP address in dotted decimal notation. It must be an address of the device and cannot be all
0s address, all 1s address, a class D address, a class E address or a loopback address.
2-8