Apply Poe-Profile Interface; Display Poe Device - 3Com S7906E Command Reference Manual

apply poe-profile interface

Syntax
apply poe-profile { index index | name profile-name } interface interface-range
undo apply poe-profile { index index | name profile-name } interface interface-range
View
System view
Default Level
2: System level
Parameters
index index: Index number of the PoE configuration file, in the range 1 to 100.
name profile-name: Name of the PoE configuration file, a string of 1 to 15 characters.
interface-range: Range of Ethernet interface numbers, indicating multiple Ethernet interfaces. The
expression is interface-range = interface-type interface-number [ to interface-type interface-number ],
where interface-type interface-number represents the interface type and interface number. The start
interface number should be smaller than the end interface number. Ethernet interface numbers can
be in any range. If any interface in the specified range does not support PoE, it is ignored when the
PoE configuration file is applied.
Description
Use the apply poe-profile interface command to apply the PoE configuration file to one or more PoE
interfaces.
Use the undo apply poe-profile interface command to remove the application of the PoE
configuration file to the specified PoE interface(s).
Related commands: display poe-profile interface, apply poe-profile.
Examples
# Apply the PoE configuration file named ABC to the PoE interface Ethernet 2/0/1.
<Sysname> system-view
[Sysname] apply poe-profile name ABC interface ethernet 2/0/1
# Apply the indexed PoE configuration file to PoE interfaces Ethernet 2/0/2 through Ethernet 2/0/8.
<Sysname> system-view
[Sysname] apply poe-profile name ABC interface ethernet 2/0/2 to ethernet 2/0/8

display poe device

Syntax
display poe device
View
Any view
1-2