3Com S7906E Command Reference Manual page 2176

Description
Use the display info-center command to display the information of each output destination.
Examples
# Display configurations on each output destination.
<Sysname> display info-center
Information Center:enabled
Log host:
2.2.2.2, channel number : 8, channel name : channel8,
host facility local7
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
SNMP Agent:
channel number : 5, channel name : snmpagent
Log buffer:
enabled,max buffer size 1024, current buffer size 512,
current messages 512, dropped messages 0, overwritten messages 740
channel number : 4, channel name : logbuffer
Trap buffer:
enabled,max buffer size 1024, current buffer size 256,
current messages 216, dropped messages 0, overwritten messages 0
channel number : 3, channel name : trapbuffer
logfile:
channel number:9, channel name:channel9
Information timestamp setting:
log - date, trap - date, debug - date,
loghost - date
Table 1-3 display info-center command output description
Information Center
Log host:
2.2.2.2, channel number : 8, channel name :
channel8,
host facility local7
Console:
channel number : 0, channel name : console
Monitor:
channel number : 1, channel name : monitor
Field
1-3
Description
The current state of the information center, which
could be enabled or disabled.
Configurations on the log host destination (It can
be displayed only when the info-center loghost
command is configured), including IP address of
the log host, the channel number and channel
name used, and logging facility used.)
Configurations on the console destination,
including the channel number and channel name
used
Configurations on the monitor terminal
destination, including the channel number and
channel name used