3Com S7906E Command Reference Manual page 1519

route-type type-code3: Specifies the type code for the OSPF extended community attribute of Route
Type. Valid values are 0x0306 and 0x8000.
Description
Use the ext-community-type command to configure the type code of an OSPF extended community
attribute.
Use the undo ext-community-type command to restore the default.
By default, the type codes for the OSPF extended community attributes of Domain ID, Router ID, and
Route Type are 0x0005, 0x0107, and 0x0306 respectively.
Examples
# Configure the type codes of OSPF extended community attributes Domain ID, Router ID, and Route
Type as 0x8005, 0x8001, and 0x8000 respectively for OSPF process 100.
<Sysname> system-view
[Sysname] ospf 100
[Sysname-ospf-100] ext-communityroute-type domain-id 8005
[Sysname-ospf-100] ext-communityroute-type router-id 8001
[Sysname-ospf-100] ext-communityroute-type route-type 8000
filter-policy export
Syntax
filter-policy { acl-number | ip-prefix ip-prefix-name } export [ direct | isis process-id | ospf process-id
| rip process-id | static ]
undo filter-policy export [ direct | isis process-id | ospf process-id | rip process-id | static ]
View
BGP-VPN instance view
Default Level
2: System level
Parameters
acl-number: IP ACL number, in the range 2000 to 3999.
ip-prefix-name: IP address prefix list name, a string of 1 to 19 characters.
direct: Filters direct routes to be advertised.
isis process-id: Filters ISIS routes to be advertised that are from a specified ISIS process. The
process-id argument is in the range 1 to 4294967295.
ospf process-id: Filters OSPF routes to be advertised that are from a specified OSPF process. The
process-id argument is in the range 1 to 4294967295.
rip process-id: Filters RIP routes to be advertised that are from a specified RIP process. The process-id
argument is in the range 1 to 4294967295.
static: Filters static routes to be advertised.
1-15