3Com S7906E Command Reference Manual page 1624

Field
BGP current state
Up for
BGP current event
BGP last state
Port
Configured
Received
Negotiated
Peer optional capabilities
Peer support bgp multi-protocol extended
Peer support bgp route refresh capability
Address family IPv4 Unicast
Received
Sent
Maximum allowed prefix number
Threshold
Optional capabilities
Route refresh capability has been enabled
Nesting-vpn peer (vpn-instance vrf1)
Peer Preferred Value
# Display all BGP VPNv4 peer information.
<Sysname> display bgp vpnv4 all peer
BGP local router ID : 2.2.2.2
Local AS number : 100
Total number of peers : 1
Peer V AS MsgRcvd
1.1.1.1 4 100
Table 1-7 display bgp vpnv4 all peer command output description
Field
Peer
V
MsgSent OutQ
51 64 0
IP address of the peer
Version of BGP that the peer runs
1-12
Description
Current status of the BGP session
Duration since the peer is established
Current event of the BGP session
State that the BGP session was in before
transitioning to the current status
Local and remote ports of the BGP session
Settings of the local timers, including the active
hold interval and keepalive interval
Received active hold interval
Negotiated active hold interval
Optional capabilities of the peer
The peer supports multiprotocol extension.
The peer supports route refresh capability.
IPv4 unicast family capability
Counts of received messages and received
update messages
Counts of sent messages and sent update
messages
Maximum number of routes that the VPN
instance supports
Threshold value
Local optional capabilities
Whether the route refresh capability is supported
Whether the VPNv4 peer is a nested VPN peer
Weight for the routes from the peer
Peers in established state : 1
PrefRcv Up/Down State
2 00:45:16 Established
Description