3Com S7906E Command Reference Manual page 1799

View
Any view
Default Level
2: System level
Parameters
hwtacacs-scheme-name: HWTACACS scheme name.
statistics: Displays complete statistics about the HWTACACS server.
slot slot-number: Specifies the slot where the interface card is inserted.
Description
Use the display hwtacacs command to display configuration information or statistics of the specified or
all HWTACACS schemes.
Note that:
If no HWTACACS scheme is specified, the command will display the configuration information of
all HWTACACS schemes.
If no slot number is specified, the command will display the configuration information of the
HWTACACS scheme on the main processing unit.
Related commands: hwtacacs scheme.
Examples
# Display configuration information about HWTACACS scheme gy.
<Sysname> display hwtacacs gy
--------------------------------------------------------------------
HWTACACS-server template name
Primary-authentication-server
Primary-authorization-server
Primary-accounting-server
Secondary-authentication-server
Secondary-authorization-server
Secondary-accounting-server
Current-authentication-server
Current-authorization-server
Current-accounting-server
NAS-IP-address
key authentication
key authorization
key accounting
Quiet-interval(min)
Realtime-accounting-interval(min) : 12
Response-timeout-interval(sec)
Acct-stop-PKT retransmit times
Domain-included
Data traffic-unit
Packet traffic-unit
: gy
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0:0
: 0.0.0.0:0
: 0.0.0.0:0
: 172.31.1.11:49
: 172.31.1.11:49
: 172.31.1.11:49
: 0.0.0.0
: 790131
: 790131
: 790131
: 5
: 5
: 100
: Yes
: B
: one-packet
3-2