Startup Saved-Configuration - 3Com S7906E Command Reference Manual

View
System view
Default Level
2: System level
Parameters
None
Description
Use the slave auto-update config command to enable the configuration file auto-save function. After
the function is enabled, when you configure to save the current configuration on the AMB, the SMB
automatically saves the current configuration to its configuration file.
Use the undo slave auto-update config command to disable the function.
By default, the configuration file auto-save function is enabled.
Examples
# Enable the configuration file auto-save function.
<Sysname> system-view
[Sysname] slave auto-update config

startup saved-configuration

Syntax
startup saved-configuration cfgfile
undo startup saved-configuration
View
User view
Default Level
2: System level
Parameters
cfgfile: Configuration file name.
Description
Use the startup saved-configuration command to specify a startup configuration file (the
configuration file to be used at the next system startup).
Use the undo startup saved-configuration command to configure the system to start up with the null
configuration, that is, the factory configuration.
The specified file must be ended with a .cfg extension and saved in the root directory of the storage
device.
Related commands: display startup.
1-22