3Com S7906E Command Reference Manual page 1761

Current AccessNum
Bind location
VLAN ID
IP address
MAC address
FTP Directory
User Privilege
Total 1 local user(s) matched.
domain
Syntax
domain isp-name
undo domain isp-name
View
System view
Default Level
3: Manage level
Parameters
isp-name: ISP domain name, a case-insensitive string of 1 to 24 characters that cannot contain any
forward slash (/), colon (:), asterisk (*), question mark (?), less-than sign (<), greater-than sign (>), or @.
Description
Use the domain isp-name command to create an ISP domain and/or enter ISP domain view.
Use the undo domain command to remove an ISP domain.
Note that:
If the specified ISP domain does not exist, the system will create a new ISP domain. All the ISP
domains are in the active state when they are created.
There is a default domain in the system, which cannot be deleted and can only be changed. A user
providing no ISP domain name is considered in the default domain. For details about the default
domain, refer to command domain default enable.
Related commands: state, display domain.
Examples
# Create ISP domain aabbcc.net, and enter ISP domain view.
<Sysname> system-view
[Sysname] domain aabbcc.net
Field
1-20
Description
Number of users currently accessing network
services, either for all cards or for a specified
card.
Whether bound with a port
VLAN to which the user belongs
IP address of the user
MAC address of the user
Directory accessible to the FTP user
Local user level
1 local user in total