3Com S7906E Command Reference Manual page 1387

View
Any view
Default Level
1: Monitor level
Parameters
mode: Displays the information of join/prune messages to send in the specified IPv6 PIM mode. IPv6
PIM modes include sm and ssm, which represent IPv6 PIM-SM and IPv6 PIM-SSM respectively.
flags flag-value: Specifies to display IPv6 PIM routing entries containing the specified flag(s).Values
and meanings of flag-value are as follows:
rpt: Specifies routing entries on the RPT.
spt: Specifies routing entries on the SPT.
wc: Specifies wildcard routing entries.
interface-type interface-number: Displays the information of join/prune messages to send on the
specified interface.
ipv6-neighbor-address: Displays the information of join/prune messages to send to the specified IPv6
PIM neighbor.
verbose: Displays the detailed information of join/prune messages to send.
Description
Use the display pim join-prune command to view the information about the join/prune messages to
send.
Examples
# View the information of join/prune messages to send in the IPv6 PIM-SM mode.
<Sysname> display pim ipv6 join-prune mode sm
Expiry Time: 50 sec
Upstream nbr: FE80::2E0:FCFF:FE03:1004 (Vlan-interface1)
1 (*, G) join(s), 0 (S, G) join(s), 1 (S, G, rpt) prune(s)
-------------------------------------------------------------------------
Total (*, G) join(s): 1, (S, G) join(s): 0, (S, G, rpt) prune(s): 1
Table 1-6 display pim join-prune command output description
Expiry Time:
Upstream nbr:
(*, G) join(s)
(S, G) join(s)
(S, G, rpt) prune(s)
Field
1-16
Description
Expiry time of sending join/prune messages
IPv6 address of the upstream IPv6 PIM neighbor
and the interface connecting to it
Number of (*, G) joins to send
Number of (S, G) joins to send
Number of (S, G, rpt) prunes