Display Bgp Ipv6 Multicast Peer - 3Com S7906E Command Reference Manual

Field
Refcount
MED
Path
Origin

display bgp ipv6 multicast peer

Syntax
display bgp ipv6 multicast peer [ [ ipv6-address ] verbose ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-group-name: Name of an IPv4 or IPv6 peer group, a string of 1 to 47 characters.
ipv4-address: IPv4 address of a peer to be displayed.
ipv6-address: IPv6 address of a peer to be displayed.
log-info: Displays the log information of the specified peer.
verbose: Displays the detailed information of the peer.
Description
Use the display bgp ipv6 multicast peer command to display IPv6 MBGP peer/peer group
information.
If no parameter is specified, information about all IPv6 MBGP peers and peer groups is displayed.
Examples
# Display all IPv6 MBGP peer information.
<Sysname> display bgp ipv6 multicast peer
Count of routes that referenced the path
MED of the path
AS_PATH attribute of the route, recording the ASs it has passed,
used to avoid routing loops
Origin attribute of the route:
Indicates the route is interior to the AS.
Summary routes and routes injected with the
I
network command are considered IGP
routes.
Indicates that a route is learned from the
E
exterior gateway protocol (EGP).
It indicates that the origin of the route is
unknown and the route is learned by some
? other means. BGP sets the Origin attribute
of routes learned from other IGP protocols to
incomplete.
1-14
Description