Sftp Client Ipv6 Source - 3Com S7906E Command Reference Manual

View
User view
Default Level
3: Manage level
Parameters
server: IPv4 address or name of the server, a string of 1 to 20 characters.
port-number: Port number of the server, in the range 0 to 65535. The default is 22.
prefer-ctos-cipher: Preferred encryption algorithm from client to server, defaulted to aes128.
3des: Encryption algorithm 3des-cbc.
aes128: Encryption algorithm aes128-cbc.
des: Encryption algorithm des-cbc.
prefer-ctos-hmac: Preferred HMAC algorithm from client to server, defaulted to sha1.
md5: HMAC algorithm hmac-md5.
md5-96: HMAC algorithm hmac-md5-96.
sha1: HMAC algorithm hmac-sha1.
sha1-96: HMAC algorithm hmac-sha1-96.
prefer-kex: Preferred key exchange algorithm, defaulted to dh-group-exchange.
dh-group-exchange: Key exchange algorithm diffie-hellman-group-exchange-sha1.
dh-group1: Key exchange algorithm diffie-hellman-group1-sha1.
dh-group14: Key exchange algorithm diffie-hellman-group14-sha1.
prefer-stoc-cipher: Preferred algorithm from server to client, defaulted to aes128.
prefer-stoc-hmac: Preferred HMAC algorithm from server to client, defaulted to sha1.
Description
Use the sftp command to establish a connection to a remote IPv4 SFTP server and enter SFTP client
view.
Examples
# Connect to SFTP server 10.1.1.2.
<Sysname> sftp 10.1.1.2
Input Username:

sftp client ipv6 source

Syntax
sftp client ipv6 source { ipv6 ipv6-address | interface interface-type interface-number }
undo sftp client ipv6 source
View
System view
1-14