Hwtacacs Configuration Commands - 3Com S7906E Command Reference Manual

3

HWTACACS Configuration Commands

HWTACACS Configuration Commands
data-flow-format (HWTACACS scheme view)
Syntax
data-flow-format { data { byte | giga-byte | kilo-byte | mega-byte } | packet { giga-packet |
kilo-packet | mega-packet | one-packet } } *
undo data-flow-format { data | packet }
View
HWTACACS scheme view
Default Level
2: System level
Parameters
data: Specifies the unit for data flows, which can be byte, kilobyte, megabyte, or gigabyte.
packet: Specifies the unit for data packets, which can be one-packet, kilo-packet, mega-packet, or
giga-packet.
Description
Use the data-flow-format command to specify the unit for data flows or packets to be sent to a
HWTACACS server.
Use the undo data-flow-format command to restore the default.
By default, the unit for data flows is byte and that for data packets is one-packet.
Related commands: display hwtacacs.
Examples
# Define HWTACACS scheme hwt1 to send data flows and packets destined for the TACACS server in
kilobytes and kilo-packets.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] data-flow-format data kilo-byte packet kilo-packet
display hwtacacs
Syntax
display hwtacacs [ hwtacacs-scheme-name [ statistics ] ] [ slot slot-number ]
3-1