Hello-Option Override-Interval (Ipv6 Pim View) - 3Com S7906E Command Reference Manual

Description
Use the hello-option neighbor-tracking command to globally disable join suppression, namely enable
neighbor tracking.
Use the undo hello-option neighbor-tracking command to enable join suppression.
By default, join suppression is enabled, namely neighbor tracking is disabled.
Related commands: pim ipv6 hello-option neighbor-tracking.
Examples
# Disable join suppression globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option neighbor-tracking

hello-option override-interval (IPv6 PIM view)

Syntax
hello-option override-interval interval
undo hello-option override-interval
View
IPv6 PIM view
Default Level
2: System level
Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use the hello-option override-interval command to configure the global value of the prune override
interval.
Use the undo hello-option override-interval command to restore the system default.
By default, the prune override interval is 2,500 milliseconds.
Related commands: hello-option lan-delay, pim ipv6 hello-option lan-delay, pim ipv6 hello-option
override-interval.
Examples
# Set the prune override interval to 2,000 milliseconds globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option override-interval 2000
1-25