Display Multicast Ipv6 Rpf-Info - 3Com S7906E Command Reference Manual

Upstream interface
List of 2 downstream interfaces

display multicast ipv6 rpf-info

Syntax
display multicast ipv6 rpf-info ipv6-source-address [ ipv6-group-address ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-source-address: IPv6 multicast source address.
ipv6-group-address: IPv6 multicast group address, in the range of FFxy::/16 (excluding FFx0::/16,
FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number from 0 to F.
Description
Use the display multicast ipv6 rpf-info command to display RPF information of an IPv6 multicast
source.
Related commands: display multicast ipv6 routing-table, display multicast ipv6 forwarding-table.
Examples
# Display all RPF information of the multicast source with an IPv6 address 2001::101.
<Sysname> display multicast ipv6 rpf-info 2001::101
RPF information about source 2001::101:
RPF interface: Vlan-interface1, RPF neighbor: 2002::201
Referenced prefix/prefix length: 2001::/64
Referenced route type: igp
Route selection rule: preference-preferred
Load splitting rule: disable
Table 1-5 display multicast ipv6 rpf-info command output description
RPF information about source 2001::101
RPF interface
RPF neighbor
Referenced prefix/prefix length
Field
Field
Description
Upstream interface of the (S, G) entry. Multicast packets
should arrive through this interface.
Downstream interface list. These interfaces need to
forward multicast packets.
RPF information of the IPv6 multicast source 2001::101
Indicates the interface type and number of the RPF
interface
Indicate the IPv6 address of the RPF neighbor
Referenced route and prefix length
1-6
Description