Mld Ssm-Mapping Enable - 3Com S7906E Command Reference Manual

Description
Use the mld send-router-alert command to enable insertion of the Router-Alert option into MLD
messages to be sent from the current interface.
Use the undo mld send-router-alert command to disable insertion of the Router-Alert option into MLD
messages to be sent from the current interface.
By default, MLD messages carry the Router-Alert option.
Related commands: send-router-alert, mld require-router-alert.
Examples
# Disable insertion of the Router-Alert option into MLD messages to be sent from VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] undo mld send-router-alert

mld ssm-mapping enable

Syntax
mld ssm-mapping enable
undo mld ssm-mapping enable
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the mld ssm-mapping enable command to enable the MLD SSM mapping feature on the current
interface.
Use the undo mld ssm-mapping enable command to disable the MLD SSM mapping feature on the
current interface.
By default, the MLD SSM mapping feature is disabled on all interfaces.
Examples
# Enable the MLD SSM mapping feature on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld ssm-mapping enable
1-16