3Com S7906E Command Reference Manual page 1868

Index is 2, OUI value is 003c12
GigabitEthernet2/0/1 is link-down
Port mode is UserloginWithOUI
NeedtoKnow mode is needtoknowonly
Intrusion mode is disableport
Max MAC address number is 50
Stored MAC address number is 0
Authorization is ignored
GigabitEthernet2/0/2 is link-down
Port mode is noRestriction
NeedtoKnow mode is disabled
Intrusion mode is no action
Max MAC address number is not configured
Stored MAC address number is 0
Authorization is permitted
Table 1-1 display port-security command output description
Field
Equipment port-security is enabled
AddressLearn trap is enabled
Intrusion trap is enabled
Dot1x logon trap is enabled
Dot1x logoff trap is enabled
Dot1x logfailure is enabled
RALM logon trap is enabled
RALM logoff trap is enabled
RALM logfailure trap is enabled
Disableport Timeout
OUI value
Index
Port mode is UserloginWithOUI
NeedtoKnow mode is needtoknowonly
Intrusion mode is disableport
Max MAC address number
Stored MAC address number
Authorization is ignored
Port security is enabled.
Address learning trap is enabled.
Intrusion protection trap is enabled.
802.1X logon trap is enabled.
802.1X logoff trap is enabled.
802.1X authentication failure trap is enabled.
MAC authentication success trap is enabled.
MAC authenticated user logoff trap is enabled.
MAC authentication failure trap is enabled.
Silence timeout of the port, in seconds.
24-bit OUI value
OUI index
The port security mode is UserloginWithOUI.
The NTK mode is needtoknowonly.
Intrusion protection action is set to disableport.
Maximum number of secure MAC addresses
allowed on the port
Number of MAC addresses stored
Authorization information from the server is
ignored. By default, the information takes effect
and this field is displayed as "Authorization is
permitted."
1-2
Description