Peer Default-Route-Advertise Vpn-Instance - 3Com S7906E Command Reference Manual

By default, no AS filtering list is applied to a peer or peer group.
Examples
# In BGP-VPNv4 subaddress family view, apply AS filtering list 3 to routes advertised by peer group
test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer test as-path-acl 3 export

peer default-route-advertise vpn-instance

Syntax
peer { group-name | ip-address } default-route-advertise vpn-instance vpn-instance-name
undo peer { group-name | ip-address } default-route-advertise vpn-instance vpn-instance-name
View
BGP-VPNv4 subaddress family view
Default Level
2: System level
Parameters
group-name: Name of the peer group, a case-sensitive string of 1 to 47 characters.
ip-address: IP address of the peer.
vpn-instance-name: Name of the VPN instance, a string of 1 to 31 characters.
Description
Use the peer default-route-advertise vpn-instance command to specify to advertise all default routes
of a VPN instance to a peer or peer group.
Use the undo peer default-route-advertise vpn-instance command to remove the configuration.
By default, no default route is advertised to a peer or peer group.
Related commands: peer upe.
Examples
# In BGP-VPNv4 subaddress family view, specify to advertise default routes of VPN instance vpn1 to
peer 1.1.1.1.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer 1.1.1.1 enable
[Sysname-bgp-af-vpnv4] peer 1.1.1.1 default-route-advertise vpn-instance vpn1
1-37