3Com S7906E Command Reference Manual page 2104

View
User view
Default Level
3: Manage level
Parameters
tftp-ipv6-server: IPv6 address or host name (a string of 1 to 46 characters) of a TFTP server.
-i interface-type interface-number: Specifies the egress interface by its type and number. This
parameter can be used only in case that the TFTP server address is a link local address and the
specified egress interface must have a link local address (For the configuration of link local address,
see IPv6 Basics in the IP Services Volume).
get: Downloads a file.
put: Uploads a file.
source-filename: Source filename.
destination-filename: Destination filename. If not specified, this filename is the same as the source
filename.
Description
Use the tftp ipv6 command to download a specified file from a TFTP server or upload a specified local
file to a TFTP server.
This command applies to IPv6 networks.
Examples
# Download filetoget.txt from the TFTP server.
<Sysname> tftp ipv6 fe80::250:daff:fe91:e058 -i Vlan-interface 1 get filetoget.txt
...
File will be transferred in binary mode
Downloading file from remote TFTP server, please wait....
TFTP: 411100 bytes received in 2 second(s)
File downloaded successfully.
3-5