3Com S7906E Command Reference Manual page 1686

# Define a rule for class3 to match the advanced IPv4 ACL 3101.
<Sysname> system-view
[Sysname] traffic classifier class3
[Sysname-classifier-class3] if-match acl 3101
# Define a rule for class4 to match the advanced IPv6 ACL 3101.
<Sysname> system-view
[Sysname] traffic classifier class4
[Sysname-classifier-class4] if-match acl ipv6 3101
# Define a rule for class5 to match all the packets.
<Sysname> system-view
[Sysname] traffic classifier class5
[Sysname-classifier-class5] if-match any
# Define a rule for class6 to match the packets with their DSCP precedence values being 1.
<Sysname> system-view
[Sysname] traffic classifier class6
[Sysname-classifier-class6] if-match dscp 1
# Define a rule for class7 to match the packets with their IP precedence values being 1.
<Sysname> system-view
[Sysname] traffic classifier class7
[Sysname-classifier-class7] if-match ip-precedence 1
# Define a rule for class8 to match IP packets.
<Sysname> system-view
[Sysname] traffic classifier class8
[Sysname-classifier-class8] if-match protocol ip
# Define a rule for class9 to match the packets with the customer network 802.1p precedence 2.
<Sysname> system-view
[Sysname] traffic classifier class9
[Sysname-classifier-class9] if-match customer-dot1p 2
# Define a rule for class10 to match the packets with the service provider network 802.1p precedence 5.
<Sysname> system-view
[Sysname] traffic classifier class10
[Sysname-classifier-class10] if-match service-dot1p 5
# Define a rule for class11 to match the packets of VLAN 1024 of the customer network.
<Sysname> system-view
[Sysname] traffic classifier class11
[Sysname-classifier-class11] if-match customer-vlan-id 1024
# Define a rule for class12 to match the packets of VLAN 1000 of the service provider network.
<Sysname> system-view
[Sysname] traffic classifier class12
[Sysname-classifier-class12] if-match service-vlan-id 1000
2-4