Pim Ipv6 Hello-Option Override-Interval; Pim Ipv6 Holdtime Assert - 3Com S7906E Command Reference Manual

Examples
# Disable join suppression on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 hello-option neighbor-tracking

pim ipv6 hello-option override-interval

Syntax
pim ipv6 hello-option override-interval interval
undo pim ipv6 hello-option override-interval
View
Interface view
Default Level
2: System level
Parameters
interval: Prune override interval in milliseconds, with an effective range of 1 to 65,535.
Description
Use the pim ipv6 hello-option override-interval command to configure the prune override interval on
the current interface.
Use the undo pim ipv6 hello-option override-interval command to restore the system default.
By default, the prune override interval is 2,500 milliseconds.
Related commands: pim ipv6 hello-option lan-delay, hello-option lan-delay, hello-option
override-interval.
Examples
# Set the prune override interval to 2,000 milliseconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] pim ipv6 hello-option override-interval 2000

pim ipv6 holdtime assert

Syntax
pim ipv6 holdtime assert interval
undo pim ipv6 holdtime assert
View
Interface view
1-33