Network (Ipv6 Mbgp Address Family View) - 3Com S7906E Command Reference Manual

View
BGP view
Default Level
2: System level
Parameters
None
Description
Use the ipv6-family command to enter IPv6 MBGP address family view.
Use the undo ipv6-family command to remove all the configurations in the IPv6 MBGP address family
view.
IPv4 BGP unicast view is the default.
Examples
# Enter IPv6 MBGP address family view.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul]

network (IPv6 MBGP address family view)

Syntax
network ipv6-address prefix-length [ route-policy route-policy-name | short-cut ]
undo network ipv6-address prefix-length [ short-cut ]
View
IPv6 MBGP address family view
Default Level
2: System level
Parameters
ipv6-address: IPv6 address prefix.
prefix-length: Prefix length of the IPv6 address, in the range 0 to 128.
short-cut: If the keyword is specified for an IPv6 multicast eBGP route, the route will use the local
preference rather than its own preference, and therefore it will hardly become the optimal route.
route-policy-name: Name of a route policy, a string of 1 to 19 characters.
Description
Use the network command to inject a network to the IPv6 MBGP routing table.
Use the undo network command to remove a network from the routing table.
By default, no network is injected.
1-28