Mpls Basics Configuration Commands; Mpls Basic Configuration Commands; Display Mpls Ilm - 3Com S7906E Command Reference Manual

1

MPLS Basics Configuration Commands

Currently, only VLAN interface supports MPLS capability and LDP capability.
Except for the command for the LDP GR feature, all commands in MPLS LDP view are available in
MPLS LDP VPN instance view. The difference is that the commands serves the public network
LDP in MPLS LDP view but serves the MPLS LDP VPN instance in MPLS LDP VPN instance view.
For information about GR commands, refer to GR Commands in the System Volume.

MPLS Basic Configuration Commands

display mpls ilm

Syntax
display mpls ilm [ label ] [ slot slot-number ] [ include text ]
View
Any view
Default Level
1: Monitor level
Parameters
label: Incoming label, in the range 16 to 4294967295.
include text: Specifies incoming label mapping (ILM) entries containing a specified string.
slot slot-number: Specifies the ILM entries of the board in a slot.
Description
Use the display mpls ilm command to display information about ILM entries.
With no incoming label specified, the command displays the ILM entries of all incoming labels.
Examples
# Display the ILM entry with a specified incoming label.
<Sysname> display mpls ilm 1024
Inlabel In-Interface
--------------------------------------------------------------------------
1024 Vlan2
Token VRF-Index Oper
2 0 POP
1-1
LSP-Type Swap-Label
NORMAL ----