3Com S7906E Command Reference Manual page 1390

register: Specifies the register interface. This keyword is valid only if mode-type is not specified or is
sm.
outgoing-interface: Displays routing entries that contain the specified interface as the outgoing
interface.
include: Displays routing entries of which the outgoing interface list includes the specified interface.
exclude: Displays routing entries of which the outgoing interface list excludes the specified interface.
match: Displays routing entries of which the outgoing interface list includes only the specified interface.
mode mode-type: Specifies an IPv6 PIM mode, where mode-type can have the following values:
dm: Specifies IPv6 PIM-DM.
sm: Specifies IPv6 PIM-SM.
ssm: Specifies IPv6 PIM-SSM.
flags flag-value: Displays IPv6 PIM routing entries containing the specified flag(s). The values of
flag-value and their meanings are as follows:
act: Specifies IPv6 multicast routing entries to which actual data has arrived.
del: Specifies IPv6 multicast routing entries scheduled to be deleted.
exprune: Specifies multicast routing entries containing outgoing interfaces pruned by other IPv6
multicast routing protocols.
ext: Specifies IPv6 routing entries containing outgoing interfaces provided by other IPv6 multicast
routing protocols.
loc: Specifies IPv6 multicast routing entries on routers directly connecting to the same subnet with
the IPv6 multicast source.
niif: Specifies IPv6 multicast routing entries containing unknown incoming interfaces.
nonbr: Specifies routing entries with IPv6 PIM neighbor searching failure.
rpt: Specifies routing entries on RPT branches where (S, G) prunes have been sent to the RP.
spt: Specifies routing entries on the SPT.
swt: Specifies routing entries in the process of RPT-to-SPT switchover.
wc: Specifies wildcard routing entries.
fsm: Displays the detailed information of the finite state machine (FSM).
Description
Use the display pim ipv6 routing-table command to view IPv6 PIM routing table information.
Related commands: display ipv6 multicast routing-table in the IPv6 Multicast Routing and
Forwarding Commands in the IP Multicast Volume.
Examples
# View the content of the IPv6 PIM routing table.
<Sysname> display pim ipv6 routing-table
Total 0 (*, G) entry; 1 (S, G) entry
(2001::2, FFE3::101)
Protocol: pim-dm, Flag:
UpTime: 00:04:24
Upstream interface: Vlan-interface1
Upstream neighbor: FE80::A01:100:1
RPF prime neighbor: FE80::A01:100:1
1-19