Qos Wrr - 3Com S7906E Command Reference Manual

<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] qos wfq
[Sysname-GigabitEthernet2/0/1] qos wfq 0 weight 1
[Sysname-GigabitEthernet2/0/1] qos wfq 1 weight 200
[Sysname-GigabitEthernet2/0/1] qos wfq 2 weight 4
[Sysname-GigabitEthernet2/0/1] qos wfq 3 weight 6
[Sysname-GigabitEthernet2/0/1] qos wfq 4 weight 8
[Sysname-GigabitEthernet2/0/1] qos wfq 5 weight 10
[Sysname-GigabitEthernet2/0/1] qos wfq 6 weight 12
[Sysname-GigabitEthernet2/0/1] qos wfq 7 weight 14

qos wrr

Syntax
qos wrr
undo qos wrr
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
None
Description
Use the qos wrr command to enable weighted round robin (WRR) on a port or port group.
Use the undo qos wrr command to restore the default.
By default, the switch adopts the SP queue-scheduling algorithm.
On a port or port group with WRR enabled, the weight values of queues 0 through 7 are 1, 2, 3, 4, 5, 6,
7, and 8 respectively.
Related commands: display qos wrr interface.
Examples
# Enable WRR on GigabitEthernet 2/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 2/0/1
[Sysname-GigabitEthernet2/0/1] qos wrr
qos wrr weight
Syntax
qos wrr queue-id group { sp | group-id weight schedule-value }
undo qos wrr
3-7