Retry Stop-Accounting (Hwtacacs Scheme View); Secondary Accounting (Hwtacacs Scheme View) - 3Com S7906E Command Reference Manual

Related commands:
stop-accounting-buffer.
Examples
# Clear the buffered stop-accounting requests for HWTACACS scheme hwt1.
<Sysname> reset stop-accounting-buffer hwtacacs-scheme hwt1

retry stop-accounting (HWTACACS scheme view)

Syntax
retry stop-accounting retry-times
undo retry stop-accounting
View
HWTACACS scheme view
Default Level
2: System level
Parameters
retry-times: Maximum number of stop-accounting request transmission attempts. It ranges from 1 to
300 and defaults to 100.
Description
Use the retry stop-accounting command to set the maximum number of stop-accounting request
transmission attempts.
Use the undo retry stop-accounting command to restore the default.
Related commands:
stop-accounting-buffer.
Examples
# Set the maximum number of stop-accounting request transmission attempts to 50.
<Sysname> system-view
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] retry stop-accounting 50

secondary accounting (HWTACACS scheme view)

Syntax
secondary accounting ip-address [ port-number ]
undo secondary accounting
View
HWTACACS scheme view
stop-accounting-buffer
reset stop-accounting-buffer,
3-11
enable, retry stop-accounting,
hwtacacs
display
scheme, display