3Com S7906E Command Reference Manual page 1684

if-match
Syntax
if-match match-criteria
undo if-match match-criteria
View
Class view
Default Level
2: System Level
Parameters
match-criteria: Matching rule to be defined.
Table 2-2 The forms of the match-criteria argument
acl access-list-number
acl ipv6 access-list-number
any
customer-dot1p 8021p-list
dscp dscp-list
destination-mac mac-address
ip-precedence ip-precedence-list
protocol protocol-name
service-dot1p 8021p-list
source-mac mac-address
Field
Table 2-2 describes the available forms of this argument.
Specifies an ACL to match packets. The access-list-number
argument is in the range 2000 to 4999.
In a class configured with the operator and, the logical
relationship between rules defined in the referenced IPv4
ACL is or.
Specifies an IPv6 ACL to match IPv6 packets. The
access-list-number argument is in the range 2000 to 3999.
In a class configured with the operator and, the logical
relationship between rules defined in the referenced IPv6
ACL is or.
Specifies to match all packets.
Specifies to match packets by 802.1p precedence of the
customer network. The 8021p-list argument is a list of CoS
values. You can provide up to eight space-separated CoS
values for this argument. CoS is in the range 0 to 7.
Specifies to match packets by DSCP precedence. The
dscp-list argument is a list of DSCP values. You can provide
up to eight space-separated DSCP values for this argument.
DSCP is in the range 0 to 63.
Specifies to match the packets with a specified destination
MAC address.
Specifies to match packets by IP precedence. The
ip-precedence-list argument is a list of IP precedence values.
You can provide up to eight space-separated IP precedence
values for this argument. IP precedence is in the range 0 to 7.
Specifies to match the packets of a specified protocol. The
protocol-name argument can be IP or IPv6.
Specifies to match packets by 802.1p precedence of the
service provider network. The 8021p-list argument is a list of
CoS values. You can provide up to eight space-separated
CoS values for this argument. CoS is in the range 0 to 7.
Specifies to match the packets with a specified source MAC
address.
2-2
Description