Display Mld Ssm-Mapping - 3Com S7906E Command Reference Manual

(*, FF1E::101)
List of 1 downstream interface
Protocol

display mld ssm-mapping

Syntax
display mld ssm-mapping ipv6-group-address
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal
number ranging from 0 to F.
Description
Use the display mld ssm-mapping command to view the configured MLD SSM mappings for the
specified IPv6 multicast group.
Related commands: ssm-mapping.
Examples
# View the MLD SSM mappings for multicast group FF1E::101.
<Sysname> display mld ssm-mapping ff1e::101
Group: FF1E::101
Source list:
1::1
1::2
10::1
100::10
Table 1-5 display mld ssm-mapping command output description
Group
Source list
Field
Field
An (*, G) entry in the MLD routing table
List of downstream interfaces: namely the interfaces to which
multicast data for this group will be forwarded
Protocol type
IPv6 multicast group address
List of IPv6 multicast source addresses
1-7
Description
Description