Display Boot-Loader; Display Cpu-Usage - 3Com S7906E Command Reference Manual

<Sysname> bootrom update file mpu108.app slot 1
This command will update bootrom file on the specified board(s), Continue? [Y/N]:y
Now updating bootrom, please wait...
Start accessing bootflash chip...
Bootrom update succeed in slot 1.

display boot-loader

Syntax
display boot-loader [ slot slot-number ]
View
Any view
Default Level
2: System level
Parameters
slot slot-number: Displays boot file information of the specified board, where slot-number represents
the slot number of a board. The value range varies with devices.
Description
Use the display boot-loader command to display information of the boot file.
Related commands: boot-loader.
Examples
# Display the file adopted for the current and next boot (The prompt information of this command varies
with devices).
<Sysname> display boot-loader
The primary app to boot of board 1 at this time is: flash:/ Switch.app
The primary app to boot of board 1 at next time is: flash:/ Switch.app
The slave app to boot of board 1 at next time is: flash:/Back.app

display cpu-usage

Syntax
display cpu-usage [ task ] [ slot slot-number ]
display cpu-usage number [ offset ] [ verbose ] [ slot slot-number ] [ from-device ]
View
Any view
Default Level
1: Monitor level
1-3