Mld Last-Listener-Query-Interval; Mld Max-Response-Time - 3Com S7906E Command Reference Manual

mld last-listener-query-interval

Syntax
mld last-listener-query-interval interval
undo mld last-listener-query-interval
View
Interface view
Default Level
2: System level
Parameters
interval: MLD last listener query interval in seconds, in the range of 1 to 5.
Description
Use the mld last-listener-query-interval command to configure the MLD last listener query interval on
the current interface.
Use the undo mld last-listener-query-interval command to restore the system default.
By default, the MLD last listener query interval is 1 second.
Related commands: last-listener-query-interval, mld robust-count, display mld interface.
Examples
# Set the MLD last listener query interval to 3 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld last-listener-query-interval 3

mld max-response-time

Syntax
mld max-response-time interval
undo mld max-response-time
View
Interface view
Default Level
2: System level
Parameters
interval: Maximum response delay for MLD general query messages in seconds, in the range of 1 to 25.
Description
Use the mld max-response-time command to configure the maximum response delay for MLD
general query messages on the interface.
1-13