qos apply policy
Syntax
qos apply policy policy-name { inbound | outbound }
undo qos apply policy { inbound | outbound }
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
inbound: Specifies the inbound direction.
outbound: Specifies the outbound direction.
policy-name: Specifies the policy name.
Description
Use the qos apply policy command to apply a policy on a port or a port group.
Use the undo qos apply policy command to remove the policy applied on a port or a port group.
Note that, when you apply a policy by using the qos apply policy command, whether or not the
inbound/outbound keyword can take effect depends on the actions defined in the traffic behavior and
LPU types, as described in
Table 2-10 The support for the inbound direction and the outbound direction
LPU type
Action
Traffic
Supported
accounting
TP
Supported
Traffic
Supported
filtering
Traffic
Supported
mirroring
Configurin
g the outer
Supported
VLAN tag
Traffic
Supported
redirecting
Remarking
the
customer
Not
network
supported
VLAN ID
for packets
Table
2-10.
SC LPU
Inbound
Outbound
Supported
Supported
Supported
Supported
Not
supported
Not
supported
Supported
SA LPU
Inbound
Outbound
Not
Supported
supported
Not
Supported
supported
Not
Supported
supported
Not
Supported
supported
Not
Supported
supported
Not
Supported
supported
Not
Not
supported
supported
2-23
EA LPU
Inbound
Outbound
Not
Supported
supported
Not
Supported
supported
Not
Supported
supported
Not
Supported
supported
Not
Supported
supported
Not
Supported
supported
Not
Not
supported
supported