Display Bgp Ipv6 Multicast Routing-Table Community - 3Com S7906E Command Reference Manual

display bgp ipv6 multicast routing-table community

Syntax
display bgp ipv6 multicast routing-table community [ aa:nn&<1-13> ] [ no-advertise | no-export |
no-export-subconfed ] * [ whole-match ]
View
Any view
Default Level
1: Monitor level
Parameters
aa:nn: Community number; both aa and nn are in the range 0 to 65535.
&<1-13>: Indicates that you can provide up to 13 community numbers.
no-advertise: Displays IPv6 MBGP routes that cannot be advertised to any peer.
no-export: Displays IPv6 MBGP routes that cannot be advertised out the AS. If a confederation is
configured, it displays routes that cannot be advertised out the confederation, but can be advertised to
other sub-ASs in the confederation.
no-export-subconfed: Displays IPv6 MBGP routes that cannot be advertised out the local AS, or to
other sub-ASs in the confederation.
whole-match: Displays the IPv6 MBGP routes exactly matching the specified community attribute.
Description
Use the display bgp ipv6 multicast routing-table community command to display the IPv6 MBGP
routing information with the specified IPv6 MBGP community attribute.
Examples
# Display IPv6 MBGP routing information with the community attribute no-export.
<Sysname> display bgp ipv6 multicast routing-table community no-export
BGP Local router ID is 30.30.30.1
Status codes: * - valid, > - best, d - damped,
*> Network : 30:30::
NextHop : 30:30::30:1
PrefVal : 0
MED : 0
Path/Ogn: i
Refer to Table 1-7
h - history, i - internal, s - suppressed, S - Stale
Origin : i - IGP, e - EGP, ? - incomplete
for description on the fields above.
PrefixLen : 64
LocPrf
Label
1-18
:
: NULL