3Com S7906E Command Reference Manual page 1437

BGP Local router ID : 20.0.0.1
local AS number : 100
Total number of peers : 1
Peer V
20::21 4 200
Table 1-6 display bgp ipv6 multicast peer command output description
Field
Peer
V
AS
MsgRcvd
MsgSent
OutQ
PrefRcv
Up/Down
State
display bgp ipv6 multicast routing-table
Syntax
display bgp ipv6 multicast routing-table [ ipv6-address prefix-length ]
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-address: Destination IPv6 address.
prefix-length: Prefix length of the IPv6 address, in the range 0 to 128.
Description
Use the display bgp ipv6 multicast routing-table command to display IPv6 MBGP routing
information.
Examples
# Display IPv6 MBGP routing information.
<Sysname> display bgp ipv6 routing-table
AS MsgRcvd MsgSent
17 19
IPv6 address of the peer
Peer BGP version
AS number
Number of messages received
Number of messages sent
Number of messages to be sent
Number of prefixes received
The lasting time of the session/the lasting time of the present state
(when no session is established)
Peer state machine
Peers in established state : 1
OutQ PrefRcv Up/Down
0 3 00:09:59
Description
1-15
State
Established