C-Bsr Interval (Ipv6 Pim View) - 3Com S7906E Command Reference Manual

Related commands: c-bsr, c-bsr interval.
Examples
# Set the BS timeout to 150 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr holdtime 150

c-bsr interval (IPv6 PIM view)

Syntax
c-bsr interval interval
undo c-bsr interval
View
IPv6 PIM view
Default Level
2: System level
Parameters
interval: BS period in seconds, with an effective range of 1 to 2,147,483,647.
Description
Use the c-bsr interval command to configure the BS period, namely the interval at which the BSR sends
bootstrap messages.
Use the undo c-bsr interval command to restore the system default.
By default, the BS period value is determined by this formula: BS period = (BS timeout – 10) / 2.
The default BS timeout is 130 seconds, so the default BS period = (130 – 10) / 2 = 60 (seconds).
Related commands: c-bsr, c-bsr holdtime.
Examples
# Set the BS period to 30 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] c-bsr interval 30
1-4