Peer Route-Policy (Ipv6 Mbgp Address Family View) - 3Com S7906E Command Reference Manual

Description
Use the peer route-limit command to set the maximum number of IPv6 prefixes that can be received
from an IPv6 MBGP peer/peer group.
Use the undo peer route-limit command to restore the default.
By default, the IPv6 prefixes from an IPv6 MBGP peer/peer group are unlimited.
The router will tear down the TCP connection when the number of IPv6 prefixes received from the peer
exceeds the limit.
Examples
# Set the number of IPv6 address prefixes allowed to receive from the IPv6 MBGP peer 1:2::3:4 to
10000.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv6-family
[Sysname-bgp-af-ipv6] peer 1:2::3:4 as-number 100
[Sysname-bgp-af-ipv6] quit
[Sysname-bgp] ipv6-family multicast
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 enable
[Sysname-bgp-af-ipv6-mul] peer 1:2::3:4 route-limit 10000

peer route-policy (IPv6 MBGP address family view)

Syntax
peer { ipv6-group-name | ipv6-address } route-policy route-policy-name { import | export }
undo peer { ipv6-group-name | ipv6-address } route-policy route-policy-name { import | export }
View
IPv6 MBGP address family view
Default Level
2: System level
Parameters
ipv6-group-name: Name of an IPv6 MBGP peer group, a string of 1 to 47 characters.
ipv6-address: IPv6 address of an IPv6 MBGP peer.
route-policy-name: Route policy name, a string of 1 to 19 characters.
import: Applies the route-policy to routes received from the IPv6 MBGP peer/peer group.
export: Applies the route-policy to routes advertised to the IPv6 MBGP peer/peer group.
Description
Use the peer route-policy command to apply a route policy to routes incoming from or outgoing to an
IPv6 MBGP peer or peer group.
Use the undo peer route-policy command to remove the configuration.
1-41