3Com S7906E Command Reference Manual page 2058

View
User view
Default Level
3: Manage level
Parameters
device: Name of a storage device.
Description
Use the mount command to mount a hot swappable storage device, such as a CF card, etc (excluding
Flash). This command is effective only when the device is in unmounted state.
By default, a storage device is in the mounted state, that is, you can use it without mounting it.
Note that:
Do not remove the storage device or swap the board when mounting or unmounting the device, or
when you are processing files on the storage device. Otherwise, the file system could be damaged.
When a storage device is connected to a lower version system, the system may not be able to
recognize the device automatically, and you need to use the mount command for the storage
device to function normally.
Before removing a mounted storage device from the system, you should first unmount it to avoid
damaging the device.
Related commands: umount.
Examples
# Mount a CF card of the AMB.
<Sysname> mount cf:
% Mount cf: successfully.
%Apr 23 01:50:00:628 2003 Sysname VFS/4/LOG:
cf: mounted into slot 4.
# Mount a CF card of the SMB (assume the SMB is in slot 5).
<Sysname> mount slot5#cf:
% Mount slot5#cf: successfully.
%Apr 23 01:50:00:628 2003 Sysname VFS/5/LOG:
cf: mounted into slot 5.
move
Syntax
move fileurl-source fileurl-dest
View
User view
1-9