Display Poe Interface - 3Com S7906E Command Reference Manual

Default Level
1: Monitor level
Parameters
None
Description
Use the display poe device command to display the mapping between ID, module, and slot of all the
power sourcing equipments (PSEs).
Examples
# Display the mapping between ID, module, and slot of each PSE. (The information displayed
depends on the device model.)
<Sysname> display poe device
PSE ID SlotNo SubSNo PortNum MaxPower(W) State Model
19 6
Table 1-1 display poe device command output description
PSE ID
SlotNo
SubSNo
PortNum
MaxPower(W)
State
Model

display poe interface

Syntax
display poe interface [ interface-type interface-number ]
View
Any view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Specifies an interface by its type and number.
0 48 37
Field
off LSQ1FV48SA
ID of the PSE
Slot number of the PSE
Sub Slot number
Number of PoE interfaces on the PSE
Maximum power of the PSE (W)
PSE state:
on: The PSE is supplying power.
off: The PSE stops supplying power.
faulty: The PSE fails.
PSE model
1-3
Description