Display Portal Server - 3Com S7906E Command Reference Manual

Authentication type: Direct
Authentication network:
address = 0.0.0.0 mask = 0.0.0.0
Table 1-4 display portal interface command output description
Field
Interface portal configuration
Vlan-interface 2
Portal server
Authentication type
Authentication network
address
mask

display portal server

Syntax
display portal server [ server-name ]
View
Any view
Default Level
1: Monitor level
Parameters
server-name: Name of a portal server, a case-sensitive string of 1 to 32 characters.
Description
Use the display portal server command to display information about a specified portal server or all
portal servers.
Related commands: portal server.
Examples
# Display information about portal server aaa.
<Sysname> display portal server aaa
Portal server:
1)aaa:
IP = 192.168.0.111
Key = portal
Port = 50100
URL = http://192.168.0.111/portal
Portal configuration on the interface
Status of the portal feature on the interface, disable, enable, or
running.
Portal server referenced by the interface
Authentication mode enabled on the interface
Information of the portal authentication subnet
IP address of the portal authentication subnet
Subnet mask of the IP address of the portal authentication subnet
1-8
Description