Display Telnet Client Configuration; Display User-Interface - 3Com S7906E Command Reference Manual

3Com S7900E Series Ethernet Switches only support data bits 7 and 8. To establish the connection
again, you need to modify the configuration of the termination emulation utility running on your PC
accordingly.
Examples
# Set the data bits to 7.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] user-interface aux 0
[Sysname-ui-aux0] databits 7

display telnet client configuration

Syntax
display telnet client configuration
View
Any view
Default Level
1: Monitor level
Parameter
None
Description
Use the display telnet client configuration command to display the source IP address or source
interface configured for the current device.
Example
# Display the source IP address or source interface configured for the current device.
<Sysname> display telnet client configuration
The source IP address is 1.1.1.1.

display user-interface

Syntax
display user-interface [ type number | number ] [ summary ]
View
Any view
1-5