Display Ospf Sham-Link - 3Com S7906E Command Reference Manual

VPN-Instance Name and ID : vpn1, 1
Create time : 2006/04/08 13:01:30
Up time : 0 days, 00 hours, 11 minutes and 42 seconds
Route Distinguisher : 22:1
Export VPN Targets :
Import VPN Targets :
Import Route Policy : poly-1
Description : This is vpn1
Maximum number of Routes : 500
Interfaces :
Table 1-17 display ip vpn-instance instance-name output description
VPN-Instance Name and ID
CreateTime
Up time
Route Distinguisher
Export VPN Targets
Import VPN Targets
Import Route Policy
Description
Maximum number of Routes
Interfaces

display ospf sham-link

Syntax
display ospf [ process-id ] sham-link [ area area-id ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id: OSPF process ID, in the range 1 to 65535.
area-id: OSPF area ID. It can be an integer in the range 0 to 4294967295 or in the format of an IPv4
address.
Description
Use the display ospf sham-link command to display information about sham links.
3:3 5:5
4:4 5:5
Vlan-interface10
Field
Name and ID of the VPN instance
Time when the VPN instance was created
Duration of the VPN instance
RD of the VPN instance
Export target attribute of the VPN instance
Import target attribute of the VPN instance
Import routing policy of the VPN instance
Description of the VPN instance
Maximum number of routes of the VPN instance
Interface to which the VPN instance is bound
1-25
Description