Last-Member-Query-Interval (Igmp-Snooping View); Max-Response-Time (Igmp-Snooping View) - 3Com S7906E Command Reference Manual

last-member-query-interval (IGMP-Snooping view)

Syntax
last-member-query-interval interval
undo last-member-query-interval
View
IGMP-Snooping view
Default Level
2: System level
Parameters
interval: Interval between IGMP last-member queries, in seconds. The effective range is 1 to 5.
Description
Use the last-member-query-interval command to configure the interval between IGMP last-member
queries globally.
Use the undo last-member-query-interval command to restore the default setting.
By default, the interval between IGMP last-member queries is 1 second.
This command works only on IGMP Snooping–enabled VLANs, but not on VLANs with IGMP enabled
on their VLAN interfaces.
Related commands: igmp-snooping last-member-query-interval.
Examples
# Set the interval between IGMP last-member queries globally to 3 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] last-member-query-interval 3

max-response-time (IGMP-Snooping view)

Syntax
max-response-time interval
undo max-response-time
View
IGMP-Snooping view
Default Level
2: System level
Parameters
interval: Maximum response time to IGMP general queries, in seconds. The effective range is 1 to 25.
1-24