Uni Classification-Marking - 3Com S7906E Command Reference Manual

7
Examples
# Configure the CoS precedence-to-local precedence mapping of the packets on the ONU port.
<Sysname> system-view
[Sysname] interface onu2/0/1:1
[Sysname-Onu2/0/1:1] qos cos-local-precedence-map 0 1 1 0 2 2 3 3
Table 6-4 shows the CoS precedence-to-local precedence mapping after the configuration is compete.
Table 6-4 CoS precedence-to-local precedence mapping
0
1
2
3
4
5
6
7

uni classification-marking

Syntax
uni uni-number classification-marking index index queue qid priority priority { selector operator
matched-value } &<1-4>
undo uni uni-number classification-marking index index
View
ONU port view
Default Level
2: System level
Parameters
uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of
UNIs can be up to 80.
index: UNI index number, in the range 1 to 8. The match rule configured on the UNI port with the
smallest index number is used first.
qid: Queue ID, in the range 0 to 7.
priority: Mapping priority, in the range 0 to 7.
CoS precedence
CoS precedence
Local precedence
3
Local precedence
0
1
1
0
2
2
3
3
6-7