Display Ccc - 3Com S7906E Command Reference Manual

Field
pref
as-path
encap type

display ccc

Syntax
display ccc [ ccc-name ccc-name | type { local | remote } ]
View
Any view
Default Level
1: Monitor level
Parameters
ccc-name: CCC connection name, a string of 1 to 20 characters..
type: Specifies the type of the CCC connections.
local: Specifies local CCC connections.
remote: Specifies remote CCC connections.
Description
Use the display ccc command to display information about CCC connections.
If you do not specify the connection name or type, this command displays information about all CCC
connections.
Examples
# Display information about CCC connection c1.
<Sysname> display ccc ccc-name c1
***Name
Type
State
Intf
In-label
Out-label
Nexthop
# Display information about all CCC connections.
<Sysname> display ccc
Total ccc vc
Local ccc vc
Remote ccc vc
***Name
Type
Preference
AS-PATH of the route
Encapsulation type
: c1
: remote
: down
: Vlan-interface2 (up)
: 100
: 200
: 20.1.1.1
: 1
: 0, 0 up
: 1, 0 up
: c1
: remote
1-9
Description