Mld Timer Query - 3Com S7906E Command Reference Manual

By default, the values of the three parameters in the above-mentioned formula are 125, 2, and 10,
respectively, so the MLD other querier present interval is 125 x 2 + 10 / 2 = 255 (seconds).
Related commands: timer other-querier-present, mld timer query, mld robust-count, mld
max-response-time, display mld interface.
Examples
# Set the MLD other querier present interval to 200 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface100
[Sysname-Vlan-interface100] mld timer other-querier-present 200

mld timer query

Syntax
mld timer query interval
undo mld timer query
View
Interface view
Default Level
2: System level
Parameters
interval: MLD query interval, namely the amount of time in seconds between MLD general query
messages, in the range of 1 to 18,000.
Description
Use the mld timer query command to configure the MLD query interval on the current interface.
Use the undo mld timer query command to restore the system default.
By default, the MLD query interval is 125 seconds.
Related commands: timer query, mld timer other-querier-present, display mld interface.
Examples
# Set the MLD query interval to 200 seconds on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] mld timer query 200
1-20