Display Pim Ipv6 Control-Message Counters - 3Com S7906E Command Reference Manual

Referenced prefix/prefix length: 2001::/64
Referenced route type: igp
RPF-route selecting rule: preference-preferred
The (S, G) or (*, G) list dependent on this route entry
(2001::2, FF03::101)
Table 1-2 display pim ipv6 claimed-route command output description
RPF information about: 2001::2
RPF interface
RPF neighbor
Referenced prefix/prefix length
Referenced route type
RPF-route selecting rule
The (S,G) or (*,G) list dependent on this route
entry

display pim ipv6 control-message counters

Syntax
display pim ipv6 control-message counters [ message-type { probe | register | register-stop } |
[ interface interface-type interface-number | message-type { assert | bsr | crp | graft | graft-ack |
hello | join-prune | state-refresh } ] * ]
View
Any view
Default Level
1: Monitor level
Parameters
probe: Displays the number of null register messages.
register: Displays the number of register messages.
register-stop: Displays the number of register-stop messages.
interface-type interface-number: Displays the number of IPv6 PIM control messages on the specified
interface.
assert: Displays the number of assert messages.
bsr: Displays the number of bootstrap messages.
Field
1-11
Description
Information of the RPF route to IPv6 multicast
source 2001::2
RPF interface type and number
IPv6 address of the RPF neighbor
Address/mask of the reference route
Type of the referenced route:
igp: IGP IPv6 unicast route
egp: EGP IPv6 unicast route
unicast (direct): Direct IPv6 unicast route
unicast: Other IPv6 unicast route (such as
IPv6 static unicast route)
mbgp: IPv6 MBGP route
Rule of RPF route selection
(S, G) or (*, G) entry list dependent on this RPF
route