3Com S7906E Command Reference Manual page 1774

nas-ip address
------------------------------------------------------------------
Total 1 RADIUS scheme(s)
Table 2-1 display radius scheme command output description
Field
SchemeName
Index
Type
Primary Auth IP/ Port/ State
Primary Acct IP/ Port/ State
Second Auth IP/ Port/ State
Second Acct IP/ Port/ State
Auth Server Encryption Key
Acct Server Encryption Key
Interval for timeout(second)
Retransmission times for timeout
Interval for realtime accounting(minute)
Retransmission times of realtime-accounting
packet
Retransmission times of stop-accounting packet
Quiet-interval(min)
Username format
Data flow unit
Packet unit
nas-ip address
Total 1 RADIUS scheme(s)
= 10.1.1.1
Name of the RADIUS scheme
Index number of the RADIUS scheme
Type of the RADIUS server
IP address/access port number/current status of
the primary authentication server: (active or
block)
If there is no primary authentication server
specified, the IP address is 0.0.0.0 and the port
number is the default. This rule is also applicable
to the following three fields.
IP address/access port number/current status of
the primary accounting server: (active or block)
IP address/access port number/current status of
the secondary authentication server: (active or
block)
IP address/access port number/current status of
the secondary accounting server: (active or
block)
Shared key of the authentication server
Shared key of the accounting server
Timeout time in seconds
Times of retransmission in case of timeout
Interval for realtime accounting in minutes
Retransmission times of realtime-accounting
packet
Retransmission times of stop-accounting packet
Quiet interval for the primary server
Format of the username
Unit of data flows
Unit of packets
The IP address for the device to use as the
source address of the RADIUS packets to be
sent to the server
1 RADIUS scheme in total
2-3
Description