Restore Startup-Configuration - 3Com S7906E Command Reference Manual

restore startup-configuration

Syntax
restore startup-configuration from src-addr src-filename
View
User view
Default Level
2: System level
Parameters
src-addr: IP address or name of a TFTP server. The address cannot be an IPv6 address.
src-filename: Filename of the configuration file to be downloaded from the specified server.
Description
Use the restore startup-configuration command to download a configuration file from the specified
TFTP server to the device and specify the configuration file as the startup configuration file to be used at
the next startup of the device.
This command downloads the configuration file to the AMB and specifies the file as the configuration file
to be used at the next startup of the AMB, and meanwhile copies the file to the SMB and specifies the
file as the configuration file to be used at the next startup of the SMB.
If the file to be downloaded has the same filename as an existing file on the AMB or SMB, you will be
prompted whether you want to overwrite the existing file or not. In addition, both the AMB and the SMB
are assumed to use the storage devices of the same type when the device is checking the filename or
backing up the configuration file to the SMB. When backing up the configuration file to the SMB, the
device saves the file to the same directory on the SMB as on the AMB, that is, the root directory. If the
AMB and SMB are of different types, for example, a Flash and a CF card respectively, the backup
operation will fail.
Examples
# Download configuration file config.cfg from the TFTP server whose IP address is 2.2.2.2, and the
configuration file is to be used at the next startup of the device.
<Sysname>restore startup-configuration from 2.2.2.2 config.cfg
Restore next startup-configuration file from 2.2.2.2. Please wait...finished!
Now restore next startup-configuration file from main to slave board. Please wait...finished!
save
Syntax
save [ file-name | safely ]
View
Any view
1-20