3Com S7906E Command Reference Manual page 1764

Related commands: local-user.
Examples
# Set the level of user user1 to 3.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1] level 3
local-user
Syntax
local-user user-name
undo local-user { user-name | all [ service-type { ftp | lan-access | ssh | telnet | terminal } ] }
View
System view
Default Level
3: Manage level
Parameters
user-name: Name for the local user, a case-sensitive string of 1 to 55 characters that does not contain
the domain name. It cannot contain any backward slash (\), forward slash (/), vertical line (|), colon (:),
asterisk (*), question mark (?), less-than sign (<), greater-than sign (>) and the @ sign and cannot be a,
al, or all.
all: Specifies all users.
service-type: Specifies the users of a type.
ftp refers to users using FTP;
lan-access refers to users accessing the network through an Ethernet, such as 802.1X users;
ssh refers to users using SSH;
telnet refers to users using Telnet;
terminal refers to users logging in through the console port, AUX port.
Description
Use the local-user command to add a local user and enter local user view.
Use the undo local-user command to remove the specified local users.
By default, no local user is configured.
Related commands: display local-user, service-type.
Examples
# Add a local user named user1.
<Sysname> system-view
[Sysname] local-user user1
[Sysname-luser-user1]
1-23