Display Transceiver - 3Com S7906E Command Reference Manual

RX power(dBM)
TX power(dBM)

display transceiver

Syntax
display transceiver interface [ interface-type interface-number ]
View
Any view
Default Level
2: System level
Parameters
interface [ interface-type interface-number ]: Displays main parameters of the pluggable transceiver
plugged in the specified interface. interface-type interface-number represents interface type and
interface number. If it is not specified, the command displays main parameters of the pluggable
transceiver(s) in all the interfaces.
Description
Use the display transceiver command to display main parameters of a single or all pluggable
transceivers.
Examples
# Display main parameters of the pluggable transceiver plugged in interface GigabitEthernet 2/0/3.
<Sysname> display transceiver interface gigabitethernet 2/0/3
GigabitEthernet2/0/3 transceiver information:
Transceiver Type
Connector Type
Wavelength(nm)
Transfer Distance(m)
Digital Diagnostic Monitoring : YES
Vendor Name
Ordering Name
Table 1-8 display transceiver command output description
Field
Connector Type
Field
: 1000_BASE_SX_SFP
: LC
: 850
: 550(50um),270(62.5um)
: H3C
: SFP-GE-SX-MM850
Type of the connectors of the transceiver:
Optical connectors, including SC (SC connector, developed
by NTT) and LC (LC connector, 1.25 mm/RJ-45 optical
connector developed by Lucent).
Other connectors, including RJ-45 and CX 4.
1-18
Description
Digital diagnosis parameter-RX power, in dBM,
with the precision to 0.01 dBM.
Digital diagnosis parameter-TX power, in dBM,
with the precision to 0.01 dBM.
Description